The domotics over the door frame

On the door frame

No masonry required

RS485 bus

High-speed communication

Standalone

Standalone version
also available

Online

Supervision with Giano

read more

SenseDoor is the unique Hotel automation solution, derived by Sense line of products, with these features:

  • small size (could be installed over the door frame);
  • customizable RGB back-light (to report the room status);
  • no need for room panel I/Os (it has its own embedded I/Os);
  • also available in standalone version (no software needed).

SenseDoor is the perfect retrofit solution or if you need to replace your hotel doors.

The technical specifications of Sensedoor control unit (SD-MODULE) are:

  • installs over the door frame (instead of standard box or DIN rack of S-MODULE Sense control unit);
  • 24VDC power (from a zone controller able to power and backup up to 32 rooms);
  • high speed RS485 bus (up to 200 meters; the room operations are guaranteed even in case of communication loss); 
  • electric strife 12VDC/300mA output (the access to the room is guaranteed even in case of blackout);
  • 2 clean contact relays;
  • 1 hall-sensor input (for door magnet switch);
  • 2 on/off inputs;
  • 2 RFID key readers (compatible with both Sense and Sensedoor RFID readers);
  • optional EnOcean radio transceiver (to communicate with wireless and battery-free EnOcean devices).

 

All the connections are available on a pratical extractable terminal.

Also available for standard box installation (Sense line S-MODULE control unit).

Comparison between SenseDoor and Electronic Locks
SenseDoor
Electronic locks
When integrated
Preserve the door design
Preserve the door design
Preserve the door design
Preserve the door design
No maintenance required
No maintenance required
No maintenance required
No maintenance required
Courtesy light
Courtesy light
Courtesy light
Courtesy light
Room activation
Room activation
Room activation
Room activation
Climate control
Climate control
Climate control
Climate control
Room status repeating*
Room status repeating*
Room status repeating*
Room status repeating*
Real-time monitoring
Real-time monitoring
Real-time monitoring
Real-time monitoring

SD-ACCESS – Access reader

RFID (proximity) card reader to access rooms or common areas, that installs over the door frame.

It has a beautiful software customizable RGB back-light, used to repeat the room status on the floor (busy, do not disturb, to be tidied up or sanitized, staff call, alarm, etc…).

Also available in white version and with optional customizable plexiglass frame with room number (back-lit by the reader itself).

SD-ACCESS

RFID (proximity) card reader to access rooms or common areas, that installs over the door frame.

It has a beautiful software customizable RGB back-light, used to repeat the room status on the floor (busy, do not disturb, to be tidied up or sanitized, staff call, alarm, etc…).

Also available in white version and with optional customizable plexiglass frame with room number (back-lit by the reader itself).

SD-KEYPAD – Access reader with keypad

RFID (proximity) card reader with keypad to access rooms or common areas, that installs over the door frame.

Same SD-ACCESS features but a keypad touch surface to enter a PIN.

The user PIN and use instructions are sent by e-mail to the guest at pre-check-in.

SD-KEYPAD – Access reader with keypad

RFID (proximity) card reader with keypad to access rooms or common areas, that installs over the door frame.

Same SD-ACCESS features but a keypad touch surface to enter a PIN.

The user PIN and use instructions are sent by e-mail to the guest at pre-check-in.

SD-ENABLER – Room enabler

RFID (proximity) card reader for room activation, that installs over the door frame.

The touch pushbutton is used to:

  • toggle the do not disturb function (when used by the guest);
  • signal the room tidy up (when used by the maiden) or the room sanitation (long press);
  • reset all alarms (when used by the director).

The room status (do not disturb, alarm, staff call, etc…) is shown to the guest using different customizable colors of the RGB back-light. The device also embeds a buzzer to emit acoustic signals (push-button feedback, alarms, etc…).

Also available in white version.

SD-ENABLER – Room enabler

RFID (proximity) card reader for room activation, that installs over the door frame.

The touch pushbutton is used to:

  • toggle the do not disturb function (when used by the guest);
  • signal the room tidy up (when used by the maiden) or the room sanitation (long press);
  • reset all alarms (when used by the director).

The room status (do not disturb, alarm, staff call, etc…) is shown to the guest using different customizable colors of the RGB back-light. The device also embeds a buzzer to emit acoustic signals (push-button feedback, alarms, etc…).

Also available in white version.

    Do you want more information?



    Request a free online demo

    –>

    DOOR MANUFACTURERS


    Are you going to choose the doors of your hotel? Ask your door trusted manufacturer the Sensedoor predisposition or take us in contact with him: the installation will be easier!