Plug & Play
Wall-mount &
230VAC powered
Wireless
RS-485, Ethernet, WiFi &
Bluetooth communication
Touch-screen
Graphical display
with mirror effect
Mirror is the Hotel automation solutions that puts domotics in your hands, with the most beauty, intuitive, modern and customizable user interface.
Its features are:
- it installs wall-mount (no other predispositions or masonry required);
- glass surface with mirror effect;
- customizable graphical multi-touch display (you could change colors, Hotel logo, room name, etc…);
- embedded RFID card reader;
- customizable RGB back-light (used to repeat the room status);
- audio speaker (ringer, warnings and alarm repeating).
Mirror has its own I/Os so it does not need any other I/O modules into the room panel. These are its technical specifications:
- 230VAC powered;
- High-speed RS485 bus (up to 200 meters; room operations are guaranteed even in case of loss communication);
- Ethernet or WiFi and Bluetooth communication;
- 12VDC output (max 300mA) for the electric strife;
- 2 clean contact relays;
- 2 on/off inputs;
- optional external temperature sensor;
- optional external RFID card reader.
WB-MIRROR – “All-in-1” device
A single product, more functions: room access and enabling, thermo-regulation, bed-side panel and domotics interface.
WB-MIRROR – “All-in-1” device
A single product, more functions: room access and enabling, thermo-regulation, bed-side panel and domotics interface.
SD-ZDR – Access reader
RFID (proximity) card reader to access rooms or common areas.
It has a beautiful software customizable RGB back-light, used to repeat the room status on the floor (busy, do not disturb, to be tidied up or sanitized, staff call, alarm, etc…).
Also available in white version and with optional customizable plexiglass frame with room number (back-lit by the reader itself).
SD-ZDR – Access reader
RFID (proximity) card reader to access rooms or common areas.
It has a beautiful software customizable RGB back-light, used to repeat the room status on the floor (busy, do not disturb, to be tidied up or sanitized, staff call, alarm, etc…).
Also available in white version and with optional customizable plexiglass frame with room number (back-lit by the reader itself).
SD-ZDR-PAD – Access reader with keypad
RFID (proximity) card reader with keypad to access rooms or common areas.
Same SD-ZDR features but a keypad touch surface to enter a PIN.
The user PIN and use instructions are sent by e-mail to the guest at pre-check-in.
SD-ZDR-PAD – Access reader with keypad
RFID (proximity) card reader with keypad to access rooms or common areas.
Same SD-ZDR features but a keypad touch surface to enter a PIN.
The user PIN and use instructions are sent by e-mail to the guest at pre-check-in.
SD-ZBH – Badge holder
RFID (proximity) card reader for room activation.
The touch pushbutton is used to:
- toggle the do not disturb function (when used by the guest);
- signal the room tidy up (when used by the maiden) or the room sanitation (long press);
- reset all alarms (when used by the director).
The room status (do not disturb, alarm, staff call, etc…) is shown to the guest using different customizable colors of the RGB back-light. The device also embeds a buzzer to emit acoustic signals (push-button feedback, alarms, etc…).
Also available in white version.
SD-ZBH – Badge holder
RFID (proximity) card reader for room activation.
The touch pushbutton is used to:
- toggle the do not disturb function (when used by the guest);
- signal the room tidy up (when used by the maiden) or the room sanitation (long press);
- reset all alarms (when used by the director).
The room status (do not disturb, alarm, staff call, etc…) is shown to the guest using different customizable colors of the RGB back-light. The device also embeds a buzzer to emit acoustic signals (push-button feedback, alarms, etc…).
Also available in white version.
